Abonnez-vous pour obtenir 10 % de réduction

How To Start A Campfire

How To Start A Campfire: A Step-By-Step Guide

A campfire can provide warmth, light, and a cozy atmosphere for cooking, socializing, or relaxing. However, building a campfire requires some skills and precautions to ensure safety and efficiency. In this article, we will show you how to build a campfire in seven easy and safe steps, using information from various sources. 

Step 1: Find or Build a Fire Ring 

A fire ring is a circular structure that contains and protects your fire from spreading. It can be made of stones, metal, or bricks. 

 Fire Ring

If you are camping in a developed campground, you will likely find a designated fire ring, grill, or fireplace where you can build your fire. Always check with the campground operator or a local ranger to make sure fires are permitted and follow their rules and regulations. 


If you are camping in an undeveloped site or in the backcountry, you may need to create your own fire ring or use an existing one if it has been left behind. However, you should only do this in areas where fires are allowed and in emergency situations. To build a fire ring, you will need a shovel and some dirt or medium-sized stones. First, clear a circle of bare dirt about 10 feet (3 meters) wide and away from any flammable materials, such as dry grass, brush, or overhanging branches. Then, dig a shallow fire pit about 2 feet (0.6 meters) wide and 6 inches (15 centimeters) deep in the center of the circle. Finally, use the dirt or stones to build a circular barrier around the pit. This will help prevent the fire from escaping and reduce the impact on the environment. 


An alternative to a fire ring is a mound fire, which is a flat platform of mineral soil (sandy, light-colored, non fertile dirt) that you can build on a flat rock or on the ground. To make a mound fire, use your shovel to collect some mineral soil from a nearby streambed or gravel bar and pile it up to about 6-8 inches (15-20 centimeters) high and wide enough to fit your fire. This will serve as the base for your fire and you can easily disperse it when you are done. 



Step 2: Gather FireWood 

To burn a successful fire, you will need three types of fuel: tinder, kindling, and firewood. 

tinder, kindling, and firewood.

Tinder is any very dry, small material that will catch fire quickly, such as dry leaves, grass, pine needles, twigs, newspaper, or cotton balls.

Kindling is small sticks or branches that are about 1 inch (2.5 centimeters) thick and long enough to reach from your elbow to your fingertips. 


Firewood is any larger piece of wood that is about the thickness of an adult wrist or more and as long as an arm. Firewood will keep your fire going for a long time and produce heat and coals. 


You can find tinder, kindling, and firewood on the ground in the forest, but make sure they are dry and dead. Do not break branches from living trees or plants, as this can damage the ecosystem and cause fire hazards. You can also buy firewood or kindling from a store near the campground or bring some from home, but only if it is local. Do not bring wood from more than 50 miles (80 kilometers) away, as it may contain insects or diseases that can harm the local flora and fauna. 


Keep your firewood and kindling in separate piles near the fire ring, but not too close to avoid sparks or flames. You should also have a source of water, a bucket, and a shovel nearby at all times in case you need to put out the fire. 


Step 3: Arrange the Kindling and Firewood 

There are different ways to arrange your kindling and firewood, depending on the purpose and size of your fire. Some common and useful methods are: 

  • Teepee fire: This is a good fire for cooking, as it produces a lot of heat and flames. To make a teepee fire, place your tinder in the center of the fire ring and then stack your kindling around it in a cone shape, leaving some space for air to flow. Then, add some firewood on top of the kindling, following the same shape and direction. Leave an opening on the side where you can light the tinder and add more fuel later. 

 Teepee fire

  • Log cabin fire: This is a good fire for warmth and light, as it burns steadily and produces a lot of coals. To make a log cabin fire, place your tinder in the center of the fire ring and then lay two pieces of firewood parallel to each other on opposite sides of the tinder. Then, lay two more pieces of firewood perpendicular to the first two, creating a square. Repeat this process with smaller pieces of firewood and kindling, building a cabin-like structure around the tinder. Leave some space between the logs for air to circulate and an opening on the side where you can light the tinder and add more fuel later. 

 Log cabin fire

  • Lean-to fire: This is a good fire for windy conditions, as it protects the tinder and kindling from being blown away. To make a lean-to fire, place your tinder in the center of the fire ring and then find a long, sturdy piece of firewood and stick one end into the ground at an angle, pointing into the wind. Then, lean smaller pieces of firewood and kindling against the long piece, creating a slope. Leave some space between the pieces for air to flow and an opening on the side where you can light the tinder and add more fuel later.

Lean-to fire 

Step 4: Light the Fire 

To light the fire, you will need a match, a lighter, or a fire starter. If you are using a match, make sure it is waterproof or keep it in a dry container. If you are using a lighter, make sure it has enough fuel and works properly. If you are using a fire starter, such as a flint and steel, a magnifying glass, or a battery and steel wool, make sure you know how to use it and have some practice before you go camping. 

To light the fire, strike your match or lighter and hold it to the tinder until it ignites. If you are using a fire starter, create a spark or focus the sun's rays on the tinder until it catches fire. Blow gently on the tinder to help it burn, but be careful not to blow it out. As the tinder burns, it will ignite the kindling and then the firewood. Add more tinder or kindling as needed to keep the fire going, but do not smother it with too much fuel. 

Step 5: Maintain the Fire 

Once your fire is burning, you will need to keep an eye on it and adjust it as needed. You can use a stick or a poker to move the wood around and create more air flow. You can also add more firewood or kindling to increase the size and heat of the fire, or let it burn down to a lower level if you want less. Do not add too much wood at once, as this can create a lot of smoke and sparks. Do not use any flammable liquids, such as gasoline or alcohol, to start or boost your fire, as this can cause explosions and injuries. 

Step 6: Enjoy the Fire 

Now that you have a nice campfire, you can enjoy it in many ways. You can cook food over the fire, using a grill, a pot, a pan, or a skewer. You can roast marshmallows, make s'mores, or pop popcorn. You can tell stories, sing songs, play games, or just relax and watch the flames. You can also use the fire to keep warm, dry your clothes, or signal for help if you are in trouble. However you use your fire, make sure you are safe and respectful. Do not throw any trash, food, or plastic into the fire, as this can create toxic fumes and harm the environment. Do not leave your fire unattended, even for a short time, as this can cause it to spread or attract unwanted animals. Do not get too close to the fire or touch it, as this can cause burns and injuries. 

Step 7: Extinguish the Fire 

When you are done with your fire, you need to extinguish it completely and safely. Do not leave your fire burning overnight or when you leave the campsite, as this can cause wildfires and damage the area. To put out your fire, follow these steps: 

  • Sprinkle water on the fire, not too much at once, and stir the embers with a shovel or a stick. Repeat this until the fire is out and everything is wet. 
  • Feel the coals, logs, and rocks with the back of your hand to make sure they are not hot. If they are, sprinkle more water and stir again. 
  • Scatter the ashes and embers around the fire ring, but only if they are cold and wet. Do not bury them, as they can retain heat and ignite roots or soil. 
  • Restore the fire ring to its original condition, or dismantle it if you built it yourself. Dispose of any trash or leftover wood and leave the site clean and natural. 

Congratulations, you have successfully built and extinguished a campfire! We hope this article was helpful and informative. Remember to always follow the fire safety rules and regulations, and have fun with your campfire. Happy camping! 

Poste un commentaire

Veuillez noter que les commentaires doivent être approuvés avant leur publication

à propos de l'auteur
Image de l'auteur

John Harvey

John est un passionné de camping automobile avec une Jeep Wrangler 2009. Il adore la pizza 🍕 et apprécie la compagnie de son chat espiègle.